HOME > Products > Broadband Based VoIP Gateway > IAD 162

SOHO Router to IP Network Gateway
Untitled Document Introduction

The IAD 161 is a one-port telephone extension and three ports SOHO Router to IP network gateway. It provides Data transfer by 10/100Mbps, telephone services and T.38 fax over IP network with easily operation and configuration. It is most suitable for SOHO and small-to-medium enterprise in Internet communication environment.

The IAD 161/ 162 also connects three computers without another IP sharing. But the IAD 162 provides two telephone numbers that one is IP telephone number and another is PSTN telephone number in one device for end users. User can make phone call via Internet or PSTN in one telephone set now. No more long distance and international telephony fee! Especially, User still can make phone call when external power is failure.

Multiple Advantages

  • Built-in NAT/IP sharing function
  • PSTN backup: user still can make phone call when external power is failure (for IAD162 only)
  • Provide both IP telephone number and PSTN telephone number in one device for end users (for IAD162 only)
  • Cost Saving - Telephone call from VPN or public Internet
  • Follows the existing telephone call dial plan
  • The plastic housing can be adjustable by manual (Vertical type or Horizontal type)



    Specification

    Protocol
    • ITU-T H.323 v2/v3/v4 compliance
    • SIP RFC3261
    Supplementary service
    • H.450 (Call Hold, Call Transfer, Call forward)
    FAX support
    • Automatically FAX detection
    • Support T.38 protocol
    Codec
    • G.711A/μ-law, G.723.1, G.729A
    Network Interface
    • Three 10/100Base-T Ethernet RJ-45 ports (auto LAN 
      MDI/MDIX)
    • One WAN port
    FXS Interface
    • One RJ-11 Telephone port (FXS)
    • One PSTN port (for IAD162 only)
    Voice Quality
    • VAD (Voice Activity Detection)
    • CNG (Comfort Noise Generation)
    • G.165/G.168 compliant echo cancellation
    • Programmable Dynamic Jitter Buffer
    • Bad Frame Interpolation
    • Provide both in-band and out of band DTMF 
      generation/detection
    • Gain/Attenuation Settings
    • G.165/G.168 compliant echo cancellation
    • Provide Progress Tone: Dial tone, busy tone, 2nd 
      dial tone, call-holding tone and ring-back tone
    QoS
    • TOS
    Caller ID
    • Generation (FSK/DTMF)
    Tone
    • DTMF / CPT (Call Progress Tone) 
      generation/detection
    TCP/IP
    • Support Fixed IP and DHCP
    ADSL Environment
    • PPPoE
    Security
    • Support H.235 security function
    Configuration & management
    • TELNET, Web Browser and W "installation 
      wizard"
    Upgrade
    • Firmware upgrade through network by TFTP/FTP
    Power
    • Input AC 100V~240V Output DC12V
    Certification
    • FCC Part 15, CE Class B, LVD
    Operation Temp
    • 5°C to 40°C
    Humidity
    • 10% to 90% (Non-condensing)
    Chassis
    • Dimension: 190mm(H) x 110mm(W) x 51.5mm(D) 
      for IAD 162 vertical type
    • Weight (unit): 0.3 kg

    Application Diagram